Window Replacement Cost in Albuquerque
Priced per window, quoted per house. Here is what a window costs by material and by type, and where the whole-house number lands.
The per-window number is the one worth understanding first.
Whole-house window quotes are hard to compare because no two houses have the same window count, the same sizes, or the same install conditions. The per-unit number is the one that lets you check whether two quotes are actually offering the same thing.
The ranges below are national market data, not a price from us. Use them to sanity-check a bid, then get a real number from an in-home estimate, because the install conditions are half the story.
By frame material
| Frame material | Typical market range, per window |
|---|---|
| AluminumThin frames, more heat transfer | $200–$800 |
| VinylThe volume choice in this market | $350–$800 |
| FiberglassStable in big temperature swings | $400–$1,500 |
| WoodHighest maintenance in dry climates | $600–$2,000 |
Window replacement typically runs $450 to $1,200 per window nationally, per Fixr's 2026 window replacement guide and the Angi and HomeGuide 2026 cost guides. Typical market ranges, not our price — your specific estimate comes from a free in-home estimate.
By window type
| Window type | Typical market range, per window |
|---|---|
| Single-hungOne moving sash | $250–$700 |
| Double-hungBoth sashes move, easier to clean | $300–$1,000 |
| CasementCranks outward, seals tightly | $400–$1,200 |
| SlidingWide openings, horizontal travel | $700–$1,500 |
| BayProjecting assembly, structural work involved | $900–$4,500 |
National market ranges from the same 2026 cost guides. Custom sizes push above these figures — a typical ballpark rather than a locked quote.
Whole house
| House | Typical market range |
|---|---|
| Single storyRoughly 10–15 windows | $8,000–$12,000 |
| Two storyRoughly 15–30 windows | $12,000–$24,000 |
Whole-house national market estimates from the 2026 cost guides. Your own number depends on count, sizes and install conditions, which is what the free in-home estimate measures.
What actually moves the number in Albuquerque
- Sun, not cold. At 5,300 feet the UV load is punishing and the daily temperature swing is large. Low-E coatings and the frame's expansion behavior matter more here than raw insulation value, and the cheap unit that fails first usually fails at the seal.
- Full-frame versus insert. An insert drops into the existing frame and is the cheaper install. A full-frame replacement takes the old frame out to the studs and is the right call when the frame is rotted or the opening is out of square. Two bids that differ wildly are often pricing these two different jobs.
- Older stucco and adobe openings. Openings that were never square to begin with take longer to fit and finish, and the finish work around stucco is part of the bid.
- Pre-1978 homes. Lead-based paint rules apply to the disturbance of painted surfaces during window work, and compliant handling is part of the job rather than an upsell.
Cost questions, answered
What does one window actually cost?
Nationally, $450 to $1,200 installed per window, per Fixr's 2026 guide. The table above splits that by frame material and by window type. Those are typical market ranges rather than a locked quote.
Why do whole-house quotes vary so much?
Window count, sizes, frame material, and whether the job is an insert or a full-frame replacement. Two bids that look far apart are frequently quoting different scopes rather than different prices.
Is vinyl good enough in this climate?
It is the volume choice here. What matters more than the material label is the glass package and the quality of the seal, because in Albuquerque the sun and the daily temperature swing are what age a window.
Do you offer financing?
Financing options are available for new windows and doors. Ask about payment options when you call.